IzoT Router - How to check if the IP routing statements are configured properly in the IP Router? (KB1090)

You can ping the FT side of the U60 that is connected to the IzoT Router using the FT channel LonTalk/IP address from the IP side to determine if the routing statements in the IP Router are configured properly.  This applies to both the built-in FT channel and external U60s.

Single byte Domain ID format: "ping 10.<domain id>.<FT channel Subnet>.1"

For example, 
1 byte domain
domain ID = 113
U60 FT channel subnet: 7 (can be found from CT drawing) 

Ping command: "ping 10.113.7.1"  (issue from your PC)